[Equipment Specifications] ● Internal Dimensions(W*D*H) - 2100×940×1360(mm) ● External Dimensions(W*D*H) - 2880×1280×1760(mm) ● Control Unit Dimensions(W*D*H) - 1200×700×1350(mm) [Performance Parameters] ● Salt Spray Test Parameters Complies with international standards (GB/T 10125, ISO 9227, ASTM B117). ● Salty-watered spray experiment - Test Chamber Temperature : 35℃ - Saturated Air Tank Temperature : 47℃ ● Corrosion resistance test - Test Chamber Temperature : 50℃ - Saturated Air Tank Temperature : 63℃ ● Temperature Stability : ±0.5℃ ● Heating Rate : >0.5℃/min ● Salt Mist Deposition Rate - Adjustable range: 0.5–3 mL/min ● Uniformity : ±0.5~1ml ● Solution Delivery : Digital flow pump control ● Adjustable speed range : 0~99ML/min ● Compressed Air Pressure：0~8.0Bar ● Compressed air saturation device water level protection - Liquid level sensor + overflow protection ● Heating System - Indirect heating (no heaters inside chamber) ● Dry Test Parameters ● Temperature Range : RT~70℃ ● Temperature Stability : ±0.5℃ ● Temperature-Humidity Test Parameters ● Temperature Range : 10℃~ 65℃ ● Humidity Range - Test Chamber Temperature : 30~95% ● Temperature Stability : ±0.5℃ ● Heating Rate : >0.8°C/min (configurable slope) ● Humidification Rate : >1% RH/min ● Heating method - External heat radiation coil with temperature-regulated main unit (improves heating rate and reduces heat loss) ● Humidification method - Nickel-cadmium alloy heating ● Water Control - External non-contact liquid level sensor supplemented by special liquid level control module ● Heating wire overheating protection system - Level 1: PT100 temperature sensor-based false temperature alarm protection. - Level 2 : Korean ROMB over temperature protection module activates to shut down operation and trigger an alarm simultaneously ● Humidity sensor : Platinum resistance sensor ● Control Unit - External temperature and humidity control unit ensures no direct exposure of components to the salt spray environment ● Condensation Test Parameters ● Temperature Range : RT~50℃ ● Temperature Stability : ±0.5℃ ● Humidity : ≈100% [Equipment Accessories] ● 120L External Salt Solution Tank : 1set ● 3m Power Cable : 1 unit ● 50mm Salt Mist Exhaust Pipe : 1 set ● 50mm Salt Mist Exhaust Pipe Straight Connector : 1 set ● 50mm Salt Mist Exhaust Pipe 90° Elbow Connector : 1 set ● 20mm Drainage Pipe with Straight Connector : 1 set ● Drainage System : 1set ● 3m Inlet Water Pipe (Inner Diameter 22mm) : 1 set ● Pipe Clamps (12~19mm Diameter) : 4 pcs ● 3m Inlet Air Tube (Outer Diameter 10mm) : 1 set ● Oil-Water Separator : 1 set ● Salt Mist Sedimentation Collector : 2 set ● Air Circulation Manifold : 1 set ● External Main Unit : 1 set [Robot for Test] ● Mid-size System - Payload Capacity: 10 kg - Reach: 1350 mm - Repeatability: ±0.03 mm - Speed: ≤4 m/s - Weight: 38.5 kg - Cable Length (Robot Arm): 5 m - Operating Environment: IP54 / 0-50°C ● Large-scale System - Payload Capacity: 20 kg - Reach: 1777.5 mm - Repeatability: ±0.1 mm - Speed: ≤3.2 m/s - Weight: 58 kg - Operating Environment: IP54 / 0-50°C - Power Consumption: 150 W
재제조 로봇/부품 복합부식시험용